intumescent coating on plasterboard fire walls

ADDING
A LAYER OF
FIRE SAFETY

Intumescnet fire protection

IntuGuard is a simple, two step intumescent fire protection system for upgrading fire separating elements on non-ferrous substrates. Sustainable and minimal waste, cost effective and minimally disruptive.


The Game Changer for Upgrading Fire Separations

safety with added fire proof paint

Adding a layer of safety

With IntuGuard you don’t need to make your building unsafe to increase its fire safety, we apply our intumescent coating solution straight onto existing fire separating elements.

ease of application fire proof paint

Optimal Performance

IntuGuard is comprised of high quality components guaranteeing optimal performance every time. Ease of on site application, non-toxic, and minimally disruptive.

environment friendly coatings sustainable

Sustainable

IntuGuard provides a low VOC coating solution approved by the Environmental Build Council. The system is sustainable and minimal waste.

fire rated tested system

Fully Tested & Endorsed

IntuGuard is the only tested & endorsed passive fire coating solution (FRR 60/60/60) for upgrading fire-separating elements in the Australasian market.

fire protective paint for plasterboard
fire protective coating system top coat intumescent non ferrous substrate

IntuGuard is an intumescent coating system developed and tested to use in the upgrade of interior fire separating elements, particularly in high occupancy, live buildings where time is a major factor.

The system combines two environmentally friendly coatings into an extremely durable, anti-microbial solution with a 60 minute fire rating (FRR of 60/60/60).

IntuGuard is the result of a partnership between Tech Coatings and PaintPlus, based on the mutual values of both companies.

THIN FILM INTUMESCENT:

The intumescent component of the system ensures compliance with NZBC requirements for fire separations:

  1. Water based, acrylic copolymer latex intumescent

  2. Single component thin-film application

  3. Airless Spray, brush or roller application

  4. Low VOC, 100% Halogen & Asbestos free

  5. Lightweight, hard, durable, abrasion resistant

  6. Low Maintenance

  7. Smooth, white, Level 4 finish

TOP COAT:

The top coat protects the intumescent coating and adds a durable, anti-microbial finish:

  1. Environmental Choice certified

  2. Anti-microbial

  3. Durable, water & heat resistant

  4. Customisable colour range

  5. Re-coat drying time: 2 hours

  6. Carbon neutral & Eco Label

HIGH TRAFFIC/ HIGH OCCUPANCY BUILDINGS:

Hospitals, Aged Care, Education Facilities
Protecting the elevated safety needs of highly vulnerable occupants

Inter-tenancy Housing, Hotels & Motels, Apartment Buildings
Solutions for Live Buildings

Mixed Use Commercial Buildings, Warehouses, Food Processing Facilities
Protecting your assets and property

Heritage Buildings
Protecting historically important and close-to-our-heart assets

BUILDING
LIFECYCLE:

New Builds
Compliant Passive Fire Protection from the get go

Change of Use
Achieve compliance after altering the use of a building

Remediation
Upgrading fire separating elements in existing buildings

AREAS WITHIN
BUILDING:

High Traffic Areas
Emergency Corridors
Stairwells

Areas with restricted Access
Riser Shafts
Elevator Shafts
Ceiling Spaces

Inter-tenancy Walls & Floors

FBL-100 Product Data Sheet
PDF DOWNLOAD

FBL-100 Safety Data Sheet
PDF DOWNLOAD

MediGuard Safety Data Sheet
PDF DOWNLOAD

Mediguard Product Data Sheet
PDF DOWNLOAD

Live
Building

MINIMALLY DISRUPTIVE, WITH NO NOISE, DUST OR ODORS.

IntuGuard is safe to use while upgrading a live building.

No noise, no vibrations and low VOC allow for remediation to take place in a live building while neighbouring areas can be used as required to deliver care.


RECOMMENDED FOR :
Hospitals, Aged Care Facilities, Hotels, Schools

live building hospital fire safety

Restricted
Access

HIGHLY RESTRICTED ACCESS OR SPACE AREAS

IntuGuard can be sprayed onto existing fire separating elements, and with the option of spray, roller or brush application, this can be done in the tightest spaces or while suspended in a harness.


RECOMMENDED FOR :
Riser shafts,  Elevator shafts, Ceiling spaces

restricted access fire safety

Independent Third party Fire Tested

We test all our systems on local materials to AS1530.4:2014.

Related Casestudy:

remediation CDHB passive fire protection

Christchurch Hospital

The hospital cannot be closed down for renovations. This leads to a heightened complexity when upgrading the building while it is needed to deliver care.

applicator intumescent coating spray

Want to know how our solution fits your project?

We’ve got you covered.

IF IT IS NOT A SYSTEM IT IS NOT A SOLUTION